Tacklite Stick & Go Label Stock

for HD Flexo Printing

NEW!

This product is suitable for NON-PERMANENT and PERMANENT use and is made from environmentally friendly polypropylene material that adheres to smooth surfaces for short to medium term. The adhesive backing is silver-grey for high opacity and is ideal for beer crates as the film can be removed without leaving any residue.

The NON-PERMANENT version has been successful on the market for years and consists of a white adhesive film with a special adhesive that adheres firmly to all smooth surfaces and can be removed without leaving any residue. The film has a high opacity, which means that the print image is not impaired even on colour-intensive surfaces. The base material is a UV-stable BOPP film, and the adhesive is a synthetically produced rubber that behaves neutrally in contact with water, thus enabling reliable labelling on beverage crates.

The PERMANENT adhesive version is made of the same material and is achieved by appropriate pre-treatment of the crate surface. This is the result of intensive research and is currently conquering the market. Currently, NOPAR International GmbH is the only supplier with this innovative idea.

Tacklite Stick & Go is a 100% label film

  • 100% BOPP film, therefore free from specks and other impurities
  • 100% register accurate printing, even with small print motifs
  • 100% adhesion for printing inks due to appropriate surface primer
  • 100% opaque due to colouring of the adhesive
  • 100% removable
  • 100% guarantee for up to 5 years
  • 100% UV protection through tested varnish or VU protection laminate (both VLB certified)
  • 100% colour accuracy through the use of the best printing inks

We will be happy to prepare a feasibility study for your individual requirements free of charge.

  • Aus alt…

  • …mach neu!

Any further information can be found in the datasheets:

Tacklite Stick & Go Label 4.1 in white

Tacklite Stick & Go Label 4.4 in transparent

Description:

TACKLITE S&G 4.1 & 4.4 LABEL-FILM is developed from the combination of an environmentally compatible polypropylene medium which is made up of a Multilayer BOPP-extrudet polyolefin-based foil with synthetic rubber and a PET Releaseliner. It is an adhesive-foil, which sticks long-lasting on all smooth surfaces, because of a special adhesive. This adhesive, based on a synthese rubber, allows the user to stick TACKLITE S&G 4.1 LABEL-FILM on all smooth surfaces and to remove it without any residue on the surface. We guarantee no pieces or remains of glue on the surface.
TACKLITE S&G 4.1 & 4.4 LABEL-FILM is printable with the current industrial printing technology. Quantities and formats on request.

Applications:

TACKLITE S&G 4.1 & 4.4 LABEL-FILM is suitable for short- and medium-term applications on all smooth surfaces perfectly, because of the special adherent layer (e.g. window pane, vehicles, metall fronts and many more). TACKLITE S&G 4.1 & 4.4 LABEL-FILM can be removed without residue in no time and it still sticks permanent.

Safety instructions:

Don‘t stick it on soft-PVC, because that compound will stick steady. If used on copper or shiny aluminium surfaces, we suggest to clean it afterwards with acetone.

If possible, please test the printability of your systems before you start.

The backside is printed in silver-grey to increase the opacity and an excellent colour gammut!

TACKLITE S&G 4.1 & 4.4 LABEL-Film is a development by NOPAR International GmbH, Bremen.

The Medium is printable with all current printing techniques, like Flex-, HD-Flexo, Roll-Offset and Roto Gravure Printing.

Custom-made productions for digital print are also possible.